Skip to main content
Specialized service

Dust removal and decontamination for critical electrical equipment

Technical cleaning of UPS systems, battery rooms, electrical rooms and server rooms, without stopping production. Dust is the first cause of overheating and early failure in power equipment.

Call 514 252 8324Request a quote

Why dust kills power equipment

A UPS, a rectifier or a switchboard breathes the air of its room. Every fan pulls in concrete dust, fibres, soot and metallic particles that settle on heat sinks, capacitors and control boards. A layer a few tenths of a millimetre thick is enough to push the internal temperature up: fans run faster, capacitors age faster, and power components eventually trip on over-temperature, often in the middle of summer.

Conductive particles are the second danger. Metallic or damp dust builds leakage paths between bus bars, terminals and traces. The result ranges from an intermittent alarm to a dead short. In a battery room, acid or alkaline residue adds to the dust and corrodes connections, which raises contact resistance and heats terminals under load.

UPS manufacturers make their warranty conditional on a clean, temperate environment. A dated cleaning report with before-and-after photos is one of the documents an insurer or auditor asks for after a failure.

What we clean

Every job is planned with your operations team. Equipment stays in service or goes to bypass as needed; nothing is opened without lockout.

UPS systems and rectifiers

Internal dust removal on heat sinks, fans, filters and boards; capacitor inspection; torque check on power connections after cleaning.

Battery rooms

Cleaning of racks, blocks and terminals; residue neutralization; ventilation and hydrogen-detection check; terminal protector applied.

Electrical rooms and switchboards

Cleaning of panels, bus bars, insulators and dry-type transformers; carbon deposit treatment; thermal camera before and after.

Server rooms and racks

Dust removal on racks, raised floors and cable trays; precision cooling unit cleaning; particle count before and after.

Cooling units

Evaporator, condenser and filter cleaning on room air conditioners; airflow check; antimicrobial treatment on request.

After construction or an incident

Decontamination after construction, fire, water damage or site dust intrusion; containment and documented restoration.

How a visit runs

Cleaning power equipment is a technical act, not housekeeping. The same technicians who maintain your UPS systems do it.

  1. Survey and lockout planEquipment inventory, temperature and particle readings, choice of mode: in service, on bypass or de-energized.
  2. ContainmentProtection of neighbouring equipment, HEPA vacuum, anti-static gear, insulated tools.
  3. Technical cleaningVacuuming, anti-static brushing, controlled dry air, lint-free cloths and electronics-safe products.
  4. Post-cleaning checkThermal camera, connection torque, ventilation test, return to service and alarm log review.
  5. Written reportBefore-and-after photos, readings, findings and dated recommendations for your audits.

How often to clean

General benchmarks. The real interval is set from the readings taken at the first cleaning.

Room Suggested interval Signs it is time
Air-conditioned, filtered server room Every 12 to 24 months Filters loading faster, deposits on racks
Electrical room or UPS room Every 12 months Noisy fans, temperature alarms, grey heat sinks
Industrial site, mine, workshop Every 6 months Visible dust on grilles, filters saturated in weeks
After construction in the building Before reloading Gypsum or concrete dust near the equipment

Sectors served

Dust removal pairs with a preventive maintenance contract or is scheduled on its own.

See also our article on electrical room and UPS cleaning for industrial plants →

Frequently asked questions

Do you have to shut the UPS down to clean it?

Not always. Grilles, filters and the outside are cleaned in service. The inside is done on maintenance bypass or de-energized, under lockout. The mode is decided at the survey, with your team.

Do you use compressed air?

Never shop compressed air: it drives dust deeper into the equipment and can spray moisture and oil. We use HEPA vacuuming, anti-static brushing and controlled low-pressure dry air.

How is this different from a cleaning company?

The technician who opens your UPS knows the voltages present, the lockout procedure and the components being touched. The cleaning ends with an electrical and thermal check, not just a wipe.

What does dust removal cost?

It depends on the number of units, the state of the room and the mode of intervention. A single UPS runs a few hundred dollars; a full room is quoted after a survey.

Is cleaning included in preventive maintenance?

A light dust removal is part of the maintenance visit. Deep cleaning of a room, a raised floor or a battery fleet is a separate job, scheduled with you.

A clean room, equipment that lasts

Tell us what is in the room and when it was last cleaned. We come back with a plan, a mode of intervention and a price.

Close Menu